Bolts are gadgets in steel, natural leather or textile used for closing or securing and also opening natural leather posts. They include clasp, press-studs, zips, velcros, and toggle and also loop, drawstring and so on.
- Situate and also punch an opening, the appropriate dimension of the rivet blog post.
- Place the blog post via the two thicknesses of leather to be secured from the flesh side.
- Place the rivet and also leather pieces on an item of hard wooden board.
- Location the cap on the blog post on the grain side.
- Set the rivet with a mallet up until the closure is completed.
Ritsrunner are utilized in Leatherwork for securing metal key plates to essential instance linings, and also sometimes for re-enforcing belt and also shoe openings.
- Strategy the design or where the eyelets will be chosen the part of the leather post.
- Punch the appropriate size hole for the eyelet.
- Location or place the eyelet in the red.
- Location the natural leather write-up or part on a hard surface area.
- Hold the eyelet setter over the eyelet with the left hand in a vertical placement and also strike the setter with a club to repair.
Press-studs are in two sets. The first pair which is a cap and eyelet and also the second is made with a spring and message.
- Find and punch an opening for the eyelet.
- Put the eyelet in the hole and put natural leather on a hard wooden board.
- Place the cap, which is the concave part in addition to the eyelet switch and strike with a club on a snap.
- Find the opening for taking care of the 2nd part on the following leather.
- Punch the appropriate size hole for the message.
- Put the blog post and also placed natural leather on a difficult wooden board or an anvil.
- Set the springtime on the post and strike with a hammer over the breeze switch device to spread the shank of the article to repair it.
- Repair the two sets together by pressing them with the hand to close.